TinkerOS_Debian v2.0.11 Release Notes 2019/08/22 *Changelog 1. Enable PPPoE service 2. Modify Tinker Configuration Tool
MD5: c2007a5c6cb8ef5afbff9bc6f716830c (zip) c53830af9bd5e804ba2f1156bfdfaf0e (img) SHA256: bbe26093021d3c4e31a7e8bea16502da01159e81c8a169ab889da321ec47f29e (zip) 4cfe69289b95587d92036f88daf966b296b2820708629f8a809e41c846da21b7 (img) TinkerOS_DebianV2.0.10 2019/05/31 1.06 GBytes TinkerOS_Debian v2.0.10
*Changelog
1. Optimized camera compatibility
MD5:
161d62a42a4589277d262f164a465888 (zip)
dee361a021b28dba4270e47428cdbfc6 (img)
SHA256:
b133c64e5acfbd11643444e5fb2e7f433ae6875985b72c3ebb9de368c2e29099 (zip)
4fc138f1310f664df449ad359972b56a5817427e6ba95d8fe3573deebf709739 (img)
TinkerOS_Debian V2.0.8 2018/11/2 1.05 GBytestinker-board-linaro-stretch-alip-v2.0.8.img
描述TinkerOS_Debian V2.0.8
TinkerOS默认用户名是“linaro”，密码是“linaro”
发行说明
* Changelog
1. Merge Upstream / Rockchip（commit：40e8774，kernel： 4.4.132）。
2.将Mali驱动程序，libmali从r9p0
升级到r13p0 3.将Linaro软件包升级到20180823
4.升级到Rockchip新的ISP驱动程序。（用户需要通过设备树覆盖来切换CSI摄像机）
5。支持具有AE / AWB功能的IMX219。
6.添加OV5647叠加层。
7.支持从挂起到RAM的LAN唤醒。
8.支持更多USB DAC。
9.为DSI Touch Display添加亮度节点并支持背光控制。
10.启用FRAMEBUFFER_CONSOLE_ROTATION，以支持帧缓冲控制台的显示旋转。
11.更新DS18B20驱动程序，启用w1_res属性以支持转换时间设置。
12.启用USB_SERIAL_MOS7840内核驱动程序。
13.支持基于ES90x8 Q2M的DAC板。
14.合并拉取请求＃18，为iptables启用更多内核配置。
15.支持Wi-Fi Direct。
16.启用BT_BNEP内核配置，以支持BNEP协议。
17.预安装cron和logroate包，以支持日志轮换。
18.修复Wi-Fi功能可能在第一次启动时失败。
19.改进HDMI热插拔检测和分辨率自动设置。
MD5：
1f1d874a301e156af562618280cdab23（zip）
0e78b5ff1c1a95494a90dba6ff55a198（img） TinkerOS_Debian V2.0.7
TinkerOS default username is “linaro”, password is “linaro”
Release Notes *Changelog 1. Merge Upstream/Rockchip (commit: 2801809, tag: release-20171213, kernel: 4.4.103). 2. Update Qt video for Media Player to support repeat function. 3. Improve the HDMI Eye Pattern. 4. Fixed onboard USB audio module missing after resume from suspend. 5. Update U-Boot's UMS name to "TinkerBoard UMS disk". 6. Set the GPIO pins default mode to input mode. 7. Support CAN-Bus. 8. Fixed Tinker Board can not be used as Wi-Fi AP. 9. Add missing spidev nodes when SPI enable. 10. Support Google AIY Voice Kit (v2) HAT sound card. 11. Sync Rockchip package to support display ratio setting. 12. Improve the USB camera performance. 13. Support ADS7846 touch screen for 4"/3.5" HDMI LCD. 14. Set U-Boot only stop the autoboot when triggered the space key. 15. Update rtl8723bs driver. 16. Improve the WiFi roaming fail issue. 17. Fix the warning message when trying to build the Kernel source code. 18. Add back the missing comment of the rk3288-gpiomem.c file.
*ARM Security Update: 1. Meltdown and Spectre Variant 1: bounds check bypass (CVE-2017-5753) Variant 2: branch target injection (CVE-2017-5715)
*Tinker CLI and GUI's Configuration Tools (Experimental): 1. Support to enabled/disabled wlan verbose log.
MD5: bbe7fe5b56c5bb4ce3ebd057b939ebda (zip) 1a723676d5e977096a8fbabf8ef06bc4 (img)
TinkerOS_Debian V2.0.5 Release Notes
*Changelog
1. Support Adafruit 3.5" TFT Touchscreen.
2. Pre-install GPIO libraries foy C, Python and Scratch.
3. Change U-Boot debug port from UART1 to UART3.
4. Improved the Kinect support.
5. Fix chromium 61 version enable gpu failure issue.
6. Add remote controller with lirc.
7. Add HDMI CEC protoctol handling (Tinker Board S)
8. Set the CPU minimum freq at 600 MHz
9. Improved GPIO interface initialization script
10. Improved the tinker-config permission.
11. Update RK packages to fix bug for playing video 1920x1072 hevc
12. Enable SND_ALOOP and SND_DUMMY as kernel module.
13. Improved Xorg performance when dragging windows
14. Enable TASKSTATS, TASK_DELAY_ACCT, TASK_XACCT and TASK_IO_ACCOUNTING to support iotop tool
15. Fix video layer over other layers
16. Disable HDMI audio when audio HAT is used.
17. Enable USB_SERIAL_CH341
18. Use Device Tree for DSI Touchscreen
19. Improved the UMS mode detection
20. Support Add w1_therm for DS18B20 and set the default w1-gpio's pin to GPIO 17 (GPIO0 C1).
21. Support the old v1.0 spec of MIPI-DSI Touchscreen Display.
22. Support RTC DS1307.
23. Support IR receiver (TOSHIBA G83C0004D310).
24. Improved the XBOX Controllers support
25. Support USB LTE module (MEIG SLM750)
26. Support ReSpeaker 2-Mics Pi HAT
27. Support JustBoom DAC
28. Support JustBoom Amp
29. Support JustBoom Digi HAT (Tinker Board S)
30. Support IQAudio Pi-DAC
31. Support IQAudio Pi-Digi+ (Tinker Board S)
32. Support HiFiBerry Digi+ Standard (Tinker Board S)
33. Support HiFiBerry Digi+ Pro (Tinker Board S)
*Tinker CLI and GUI's Configuration Tools (Experimental):
1. Fix change locale error of GUI version
2. Add custom resolution setting interface on GUI
3. Change UART log port from UART1 to UART3
4. Fix change passwd fail
5. Fix keyboard layout setting fail
MD5:
4ff4791c00f27717e6781ef02903f089 (zip)
TinkerOS_Debian V2.0.4 TinkerOS default username is “linaro”, password is “linaro” Release Notes *Changelog 1. Support w1-gpio (base) 2. Implement /dev/gpiomem for Debian. DEVMOD=0666 3. disable screen timeout setting (set Blank after to "never") 4. set xmms2 default plugin from ALSA to pulse. 5. Fix chromium 61 version enable GPU failure issue *Initial support Tinker Board S *Tinker CLI and GUI's Configuration Tools (BETA): 1. Fix VNC get the wrong status 2. Fix GUI SSH cannot disable
*Debian Security Update: 1. WPA2 (wpa_supplicant) security issue @WPA2 KRACK Attacks CVE-2017-13077 CVE-2017-13078 CVE-2017-13079 CVE-2017-13080 CVE-2017-13081 CVE-2017-13082 CVE-2017-13086 CVE-2017-13087 CVE-2017-13088 TinkerOS_Debian V2.0.3 (Beta version)
TinkerOS default username is “linaro”, password is “linaro”
1. Add CLI and GUI's Configuration Tools (BETA). (CLI: tinker-config & GUI: Preferences > Tinker Board Configuration)
2. Fixed DSI failed to bring up. (for v2.0.1)
3. Let USB audio card would not break the PulseAudio's some setting.
4. Enable UART4.
5. Add a node to provide the board's information at "/proc/board_info". (e.g. Tinker Board)
6. Add more hardware interface config (SPI0/UART2/UART3/UART4/PCM) setting at hw_intf.conf.
7. Fixed some OV5647 model cant enable.
8. Fix USB handle NAK for IN OUT SSPLIT CSPLIT transfer. (GitHub debian_kernel#3)
9. Fixed lxsession some functions (Logout / Switch User) not work.
10. Update QT5, GStreamer, xserver packages.
11. Support USB-AC56 (RTL8812AU), USB-AC68 (RTL8814AU).
12. Modify DTS overlay folder name & add prefix/postfix for overlay file(s).
13. Support more Audio DAC HAT. (e.g. HiFiBerry DAC+ Light, HiFiBerry DAC+ Standard (RCA), HiFiBerry AMP+, IQAudio Pi-DAC+, IQAudio Pi-DAC Pro, IQAudio Pi-DigiAMP+)
14. Add a 100MB Swap Space for system.
15. Support use lshw to show the board's informations.
16. HDMI: Let system try to use some default resolutions (e.g. 1080P) to fix sometime cant detection with right resolutions.
17. Enable PPS GPIO.
18. Change default hostname to "tinkerboard". (can find the device with tinkerboard.local at local network)
19. [SECURITY-PATCH] Bluetooth: Properly check L2CAP config option output buffer length.
20. Fixed x window screen blank after system's time update.
21. Auto detects the rootfs path.
22. Enable Docker support.
23. Use systemd-timesyncd to replace the ntp, let time sync more quickly.
24. Fixed tty1 can't login's error.
下载地址：链接: https://pan.baidu.com/s/1qYa9Hjm 密码: r5gg
TinkerOS_Debian V1.9 (Beta version)
TinkerOS default username is “linaro”, password is “linaro”
Changelog on V1.9
1.Enable iptables related kernel configs.
2.Enable boot animation.
3.Support PXE.
4.Support boot from USB flash.
5.Add ASUS wallpaper.
6.Disable some log.
7.Hold libsbc1_1.3-1_armhf.deb since the newer builds have problem.
8.Preload the package blueman.
9.Enable more NFS related kernel configs.
10.Preload packages exfat-fuse, exfat-utils, and gnome-screenshot.
11.Enable kernel config CONFIG_USB_IPHETH.
12.Enable multiple devices driver and RAID driver for RAID disk function.
13.Enable CHICONY HID driver.
14.Improve the stability of 4K media player.
15.Fix some issues for 4K Display.
16.Tune DSI output.
17.Add Option "Dri2Vsync" "FALSE" to disable wait vsync in /etc/X11/xorg.conf.d/20-modesetting.conf.
18.Don't hold libsbc1 at 1.3-1 and update to latest libsbc1 since the issue for A2DP has been resolved.
19.Fix the system freezing issue for "echo b > /proc/sysrq-trigger".
20.Enable CONFIG_OF related kernel configs.
21.Preload man-db package.
22.Update packages since Debian 9 is offically released.
23.Fix the problem that CSI camera can not work.
24.Support more HDMI resolutions.
25.Check the flag Dri2Vsync to skip waitting for vsync in fullscreen mode.
26.Enable PCM5122.
| 
